Good Ideas Of Wood Floor Mirror
Wood floor mirror – Whether you glued wood to a mirror surface to frame the mirror, create a decorative pattern, put panels over the mirror face or for any other purpose, the process is similar. A mirror s silvering is attached to the back of the mirror, under the mirror glass. Because silvering is projected through the glass, special mirror glue such as mirror mastic is unnecessary if you glued wood to the front of the mirror. All you need is a strong, clear epoxy film.
How to glue wood to a mirror surface, press the epoxy out of the tube and apply it to the back of the wood. Attach epoxy covered back of wood to the mirror’s surface. Hold the wood in place and attach a strip of tape over the wood to keep the wood from drift while the epoxy dries. Attach the tape to the mirror, then over the wood, and back on the mirror. Allow the epoxy to dry as instructed on the packaging. Remove target tape. And wood floor mirror ready use.
12 Photos Gallery of: Good Ideas Of Wood Floor Mirror
When choosing wood to glue to the mirror, keep in mind that your wood floor mirror will reflect the back edge of your wooden piece so it must be done so that it matches the front. Test your glue with scrap pieces of wood and glass. Glue scrap wood to your scrap glass and let the adhesive cure as long as the package recommends. Use glue for your project only if you are satisfied with your test piece results after its curing time.