Bathroom wall mirrors are typically large pieces of mirrors that are cut into a rectangle. They are mounted on the wall in the bathroom over the sink or vanity area. Homeowners sometimes doubt how to hang these mirrors as they have flat-paneled backs with no visible hooks. The solution is to use special mirror mounting equipment to hang the mirror on the wall. It’s a good idea to have another person nearby to help lift the mirror
Hold the bathroom wall mirrors of the place where you want to install it and put a plan on the top of the mirror to make sure you have it right. Does another person trace the mirror with a pencil to draw a sketch on the wall? Hold a stud finder on the bathroom wall inside the mirrored outline. Turn the stud finder on and move it over the wall until it lights up to indicate a wall stud. Place a small pencil mark on the wall of the place and find any remaining wall spikes in the area. Insert a 1/4 inch drill into a drill and create a 1-inch deep hole in the selected wall stud near the bottom left side of the mirrored outline.
12 Photos Gallery of: Ideas To Hang A Bathroom Wall Mirror
Ideas to hang a bathroom wall mirror hold a plastic mirror mounting clip against the wall with the open end facing up and adjust the screw hole with drilled hole. Insert the screw into the screw hole and secure it with a screwdriver. Lift the mirror in place and place the lower edge of the mirror in the clip. Push the mirror against the wall and keep the other person in place. Install additional mounting clips around the sides and top of the mirror to ensure that there are two leashes on each side.